NUTS, CHUCK NUTS & CASTLE NUTS

Click to Enlarge
 
Part Name : Castle Nut (M28x1.5)
Material Used : Plain Carbon Steel (C-45)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Front Axle Tractor
 
Click to Enlarge
 
Part Name : Castle Nut (M36x1.5)
Material Used : Plain Carbon Steel (C-20)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Hydraulic Shaft Tractor
   ^TOP^
 
Click to Enlarge
 
Part Name : Chuck Nut (M18x1.5)
Material Used : Plain Carbon Steel (C-45)
Surface Treatment : Galvanised, Zinc Plating (White)
Usage : Idle Pin Nut (Tractor)
 
Click to Enlarge
 
Part Name : Chuck Nut (M20x1.0)
Material Used : Plain Carbon Steel (C-45)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Idle Pin Nut (Tractor)
   ^TOP^
 
Click to Enlarge
 
Part Name : Chuck Nut (M30x1.5)
Material Used : Plain Carbon Steel (C-20)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Axle Nut (Tractor)
Click to Enlarge
 
Part Name : Pinion Nut (M45x1.5)
Material Used : Carbon Steel Forging (45C8, EN43B,
SAE 1045, AISI-C1045, Din 17200
Surface Treatment : Toughten to 25-30 HRC, Zinc Plating (White)
Usage : Differential Nut (LCV / HCV)
   ^TOP^
Click to Enlarge
 
Part Name : Chuck Nut (M56x2.0)
Material Used : Plain Carbon Steel (C-45)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Axle Nut Harvester Combine
Click to Enlarge
 
Part Name : Chuck Nut (M80 x2.0)
Material Used : Plain Carbon Steel (C-45)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Axle Nut Fork Lift
   ^TOP^
Click to Enlarge
 
Part Name : Crank Nut (M30x1.5)
Material Used : Plain Carbon Steel (C-45)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Crank Shaft Nut (Tractor Engine)
Click to Enlarge
 
Part Name : Dome Nut (M24x1.5)
Material Used : Carbon Steel (20C8, EN 3D,
SAE 1021, AISI-C1021, Din 17155
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Hydraulic Pump
   ^TOP^
Click to Enlarge
 
Part Name : Hex Nut Special (M70x2)
Material Used : Plain Carbon Steel (C-45)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Axle Nut Tractor
Click to Enlarge
 
Part Name : Lay Shaft Nut (M39x1.5)
Material Used : Carbon Steel (20C8, EN 3D,
SAE 1021, AISI-C1021, Din 17155
Surface Treatment : Zinc Plating (Yellow)
Usage : Lay Shaft (Tractors)
   ^TOP^
Click to Enlarge
 
Part Name : Lock Nut Differential (M25x1.5)
Material Used : Carbon Steel Forging (45C8, EN43B,
SAE 1045, AISI-C1045, Din 17200
Surface Treatment : Toughten to 25-30 HRC, Zinc Plating (Yellow)
Usage : Differential LCV
Click to Enlarge
 
Part Name : Nut Lock Bearing (M60x1.5)
Material Used : Plain Carbon Steel (C-45)
Surface Treatment : Hardened, Zinc Plating (Yellow)
Usage : Rear Axle Nut (LCV)
   ^TOP^
Click to Enlarge
 
Part Name : Nut Slotted (6) (M24x1.5)
Material Used : Plain Carbon Steel (C-20)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Front Axle Nut (LCV)
Click to Enlarge
 
Part Name : Nut Slotted (8) (M24x1.5)
Material Used : Plain Carbon Steel (C-20)
Surface Treatment : Galvanised, Zinc Plating White)
Usage : Front Axle Nut (LCV)
   ^TOP^
Click to Enlarge
 
Part Name : Nut Slotted (M24x1.5)
Material Used : Plain Carbon Steel (C-20)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Front Axle Combine
Click to Enlarge
 
Part Name : Nut Steering Knuckle (M30x1.0)
Material Used : Plain Carbon Steel (C-45)
Surface Treatment : Toughten, Blackodizing
Usage : Knuckle Arm (LCV)
   ^TOP^
Click to Enlarge
 
Part Name : Nut Wheel Bearing (RH, LH) M52x1.5
Material Used : Carbon Steel Forging (45C8, EN43B,
SAE 1045, AISI-C1045, Din 17200
Surface Treatment : Zinc Plating (Yellow)
Usage : Rear Wheel LCV
Click to Enlarge
 
Part Name : Pinion Nut (M45x1.5)
Material Used : Carbon Steel Forging (45C8, EN43B,
SAE 1045, AISI-C1045, Din 17200
Surface Treatment : Toughten to 25-30 HRC, Zinc Plating (White)
Usage : Differential Nut (HCV)
   ^TOP^
Click to Enlarge
 
Part Name : Slotted Nut (M30x2.0)
Material Used : Plain Carbon Steel (C-20)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Tractor
Click to Enlarge
 
Part Name : Special Nut (M28x1.5)
Material Used : Plain Carbon Steel (C-45)
Surface Treatment : Galvanised, Zinc Plating (Yellow)
Usage : Tractor
   ^TOP^
   
Click to Enlarge
 
Part Name : Special Nut Slotted (M24x1.5)
Material Used : Plain Carbon Steel (C-40)
Surface Treatment : Galvanised, Zinc Plating (White)
Usage : Self Lock Nut (Hardware)
 
 ^TOP^

Actuator Fork | Adjusting Screw (M48x2.0) | Banjo Bolt (M12x1.0) | Banjo Connector (3/8"BSP/MI8x1.5) | Banjo Connector (3/8”/M14x1.5) | Banjo Connector for (1-1/16” UNF/M22x1.5) | Banjo Connector Inlet/Outlet | Castle Nut (M28x1.5) | Castle Nut (M36x1.5) | Chuck Nut (M18x1.5) | Chuck Nut (M20x1.5) | Chuck Nut (M30x1.5) | Chuck Nut (M45x1.5) | Chuck Nut (M56x2.0) | Chuck Nut (M80 x2.0) | Crank Nut (M30x1.5) | Dome Nut (M24x1.5) | Elbow M22/M26 (M 22x1.5/M26x1.5) | Hex Nut Special (M70x2) | Lay Shaft Nut (M39x1.5) | Lock Nut Differential (M25x1.5) | Nut Lock Bearing (M60x1.5) | Nut Slotted (6) (M24x1.5) | Nut Slotted (8) (M24x1.5) | Nut Slotted (M24x1.5) | Nut Steering Knuckle (M30x1.0) | Nut Wheel Bearing (RH, LH) M52x1.5 | Pinion Nut (M45x1.5)| Plug (M 20x1.5) | Plug (M24x1.5) | Seal Cover | Slotted Nut (M30x2.0) | Spacer | Special Bolt (M24x1.5) | Special Bolt with Castle Nut (M39x3) | Special Bolt with Castle Nut (M39x3) | Special Hex Bolt (M30x3) | Special Nut (M28x1.5) | Special Nut Slotted (M24x1.5) | T Bolt (MI4x2) | T Wrench | Washer (Machined) | Wheel Bolt Material

Home | Products | Enquiry | Contact Us | Certificate
Copyright © Bubber Industries - All Rights Reserved
 
Site Designed & Hosted By : VardhmanSoft
L